Apollo_LED-_Runway_Guard_Light

Apollo Guard Light
Product Description

High Intensity Elevated runway guard lights are designed to draw attention to the hold short line, the area where a taxiway meets the runway, particularly in low visibility conditions to help avoid incursion onto an active taxiway/runway. They are usually a of pair of two flashing yellow lights that are positioned at each side of the taxiway at taxiway/runway intersections and are required by the standards (MADS & ICAO 5.3.20)

The APOLLO (IR804L) High Intensity LED technology allows for optimum performance of the unit in the harshest climatic conditions whilst also providing the time and cost savings associated with new technologies.

View our complete range of taxiway lighting.

Request a Quote

  • This field is for validation purposes and should be left unchanged.

Certified to Latest Standards

  • ICAO Annex 14 Volume 1, section 5.3.22 Configuration A, High Intensity
  • CAA CAP 168

Product Data Sheet

Click to download the product data sheet

Specifications

High Intensity Runway Guard Ligt ICAO  

  • Colour Yellow 
  • Max/Min Intensity ratio <3.0 
  • Main ellipse average intensity 3000cds 
  • Main ellipse minimum intensity 1500cds 
  • Second ellipse minimum intensity 1000cds 
  • Third ellipse minimum intensity 300cds

Typical Measured Values 

  • Colour Yellow 
  • Main ellipse average intensity 3436cds 
  • Main ellipse maximum intensity 2496cds 
  • Main ellipse minimum intensity 1173cds 
  • Second ellipse minimum intensity 1165cds 
  • Third ellipse minimum intensity 343cds

Packaging

  • Net weight 15kg  
  • Gross weight 28kg (boxed)  
  • Box 850mm (L) x 450mm (W) x 400mm (H)
Newsletter Signup!

Newsletter Signup

Please fill in the contact form below to signup to our newsletter.