Runway Incursions

What is a runway incursion?

A runway incursion happens where two or more vehicles are either on the same runway or approaching the same runway which can result in a conflicting situation. This can also be defined as “An event at an airfield involving the incorrect presence or a vehicle, aircraft or person on the protected area of the surface designated for the landing and taking off of an aircraft”.

It should be understood that a consequence of a runway incursion maybe due to the failure of a pilot or vehicles driver to comply with a valid ATC clearance or their compliance with an appropriate ATC clearance. The main consequence of any runway incursion is the increased risk of collision for an aircraft on the ground. According to investigations into runway incursion events which occurred in the period of 2014-2016, the following general observations were seen to be the most common consequences:

  • Mistaken entry of an aircraft or vehicle onto the runway protected area without ATC clearance
  • Misidentified presence of a vacating aircraft or vehicle onto the runway protected area
  • Wrong runway crossing by an aircraft or vehicle without or against ATC instructions
  • Landing without ATC clearance
  • Take-off without ATC clearance

Make an Enquiry

Your Name*

Your Email*

Your Phone Number*

Your Message

Product information

Click to download the product data sheet

Other main factors that can increase the possibility of incursions occurring include the following:

  • Low visibility may increase the chance of a pilot becoming disorientated and unsure of their position whilst manoeuvring along taxiways. These conditions are also likely to restrict ATC’s ability to identify and follow the aircraft visually.
  • The design of the taxiway infrastructure which requires aircraft to cross an active runway to travel between its take-off or landing runway and the parking position, brings additional risk of an incident potentially occurring.
  • Line ups for a series of aircraft departures from the same runway but from different entry positions could lead to an increased risk for runway incursion occurrences.
  • Late changes to departure times and clearances may lead to a temporary lack of concentration in the pilot’s attentiveness.
  • Use of Non-Standard Terminology can lead to confusion and misunderstanding between the pilots and controllers.
  • Simultaneous use of more than one Language for communications between ATC and vehicles crews.

There are ways several ways to overcome these types of situations to avoid a runway incursion event:

  • Maintenance of situation awareness by flight crew and others using the manoeuvring area, specifically in respect of their own location in relation to active runways, and that of other aircraft and vehicles relative to active runways.
  • Presence of standard Runway Markings and Taxiway Surface Markings and Signs
  • Presence of standard Runway Lighting and Taxiway Lighting including the installation of Runway Status Lights (RWSL) and Runway Holding Point Lighting.

The use of runway incursion control systems that monitor vehicle movement at the entrance or exit of the protected area.

Newsletter Signup!

Newsletter Signup

Please fill in the contact form below to signup to our newsletter.